stopped-flow system in Transit Lab
Request form for external booking (Sample and analysis details)
Request form for internal booking (Sample and analysis details)
Make
TgK Scientific Limited
Model
SF61-DX2
Facility Status
Not Working
Date of Installation
Facility Management Division
Centre for Sophisticated Instruments and Facilities (CSIF)-IoE Funded

.

Category

  • Spectroscopy and Spectrometry » Optical Spectroscopy

Booking Details

Available Equipment/ Mode of use
absorbance
fluorescence

Facility Management Team and Location

Facility In Charge
Professor Shobhna Kapoor
Professor Ishita Sengupta
Co-convenors
Prof. Ishita Sengupta
Prof. Shobhna Kapoor
Facility Manager
NA
Facility Operator
NA
Facility Management Members
Prof. Ashutosh Kumar
Prof. Nandita Madhavan
Prof. Shobhna Kapoor
Prof. Pradeepkumar PI
Prof. Ishita Sengupta
Department
Chemistry
Lab Email ID
ishita@chem.iitb.ac.in
Facility Location
Ground Floor, Transit Building, IIT Bombay
Lab Phone No
+91 22-2576 7167

Facility Features, Working Principle and Specifications

Facility Description

Facility Description

Versatile Detection Options – The system features a high performance optical system that combines low stray light with high throughput. A modular approach allows selection of the appropriate light sources and detectors according to the work being done. Multi-wavelength absorbance analysis from a single shot using the KinetaScan CCD detector can be especially useful for small quantities of samples. Fluorescence polarisation and anisotropy measurements are fully software controlled, whilst conductivity allows the study of fast conductimetric reactions.

Stability, Sensitivity And Flexibility – Reference channel optics offer outstanding stability and immunity from interference to allow even smaller signal changes to be followed and over extended time scales without the effects of drift. Ease of use and intuitive operation are the product of Kinetic Studio, our Windows-based software. This features easy to follow set up routines and auto calibration.

Operation over a wide temperature range is enhanced by the use of the low temperature option, allowing work down to -90°C. Or down to -20°C by using the innovative T-Pod option.

Innovative Design – The unique flow circuit design ensures that the minimal amount of solution is used for each experiment. This is particularly important if you are using volume limiting samples (e.g. mutant enzymes or other proteins) or equally novel materials. A robust ceramic stop/waste valve gives extended life. All components have been carefully selected for compatibility and reliability.

The robust nature and careful design of the flow circuit has led to it being an instrument of choice for users wishing to carry out their experiments under anaerobic conditions – the containment of reagents under low oxygen (anaerobic) conditions is noteworthy. For some users, the choice is to use a glove box – we have expertise in adapting instruments for use in glove boxes.

Programmable Multi-Shot Capability – Bringing added versatility for multi-wavelength analysis for both absorbance and fluorescence, even into the deep UV part of the spectrum. The KinetAsyst system is fully programmable for number of shots and wavelength, with the SF-61DX2 instrument adding age time to the list of user-controlled variables.

Kinetic Studio Speeds Data Processing – Its modern Windows interface allows Kinetic Studio to provide a host of data handling and visualisation facilities. An easy export utility brings compatibility with other data processing packages such as ReactLab, SPECFIT/32, ORIGIN, KaleidaGraph and THE SCIENTIST.

Features Working Principle

Stopped-flow is a technique that rapidly mixes two or more solutions to study fast reactions ( ms timescale), using a high-efficiency mixer, and then observing the reaction's progress in real-time through methods like absorbance or fluorescence spectroscopy

Instructions for Registration, Sample Preparation, User Instructions and Precautionary Measures

Instructions for Registration

Internal Users

Users within IIT Bombay can apply by emailing the facility in charges after training is completed (for now).

Please click on this link to see the flow chart of the full procedure:   @Link to Flow Chart

The online registration form should be completely filled out by the applicant. For any query contact the facility manager. 

After getting approval from the student’s PI along with the committing charges, an appointment will be given as per queue, and will be informed by email/phone.

At least 24 hours prior information should be given to the stopped-flow lab if users want to cancel/postpone the slot. 

External Users

 1. External users can come personally or send the filled in registration form along with the Demand draft and a letter from the Guide / Head on the Institute Original Letter Head stating that the analysis is for research purpose, to qualify for academic concession. The letter should be addressed to “Prof. Shobhna Kapoor and Prof. Ishita Sengupta, Facility-in-charges, Stopped-flow Spectrometer, Department of Chemistry, IIT Bombay, Powai, Mumbai – 400076.”

2.Operators will have to undergo training and demonstrate independence through a test before given usership.

3. Samples can be brought along on the date of your appointment.

 

Instruction for Sample Preparation

Samples have to be soluble, high concentration, and devoid of solid particles. buffers should not be viscous, filtered and degassed

User Instructions and Precautionary Measures

Samples have to be soluble, high concentration, and devoid of solid particles. buffers should not be viscous, filtered and degassed. Users have to undergo training and pass a written and hands-on test before proceeding to use the instrument. The instrument has to be returned to the original configuration if settings are changed. Nitrogen gas and water bath needs to be refilled at regular intervals.

Charges for Analytical Services in Different Categories

Usage Charges
Internal Users1. Rs. 250/day (Rs. 100/day if booking is for a stretch of 5 days or more)
External Users (Academic) 1. Rs. 500/day
External Users (National R&D Labs) 1. Rs. 1250/day

External Users (Industry & Non Govt.

Agency)

1. Rs. 2500/day

Applications

fast reactions in the 2 ms timescale slower (binding, folding, scattering assays etc)

Sample Details

Chemical allowed

non corrosive

Allowed Substrate

biomolecules, small molecules 

Gases allowed

none

Substrate Dimension

NA

Target dimension

NA

Contamination remarks

NA

Precursors/ Targets allowed

NA

SOP, Lab Policies and Other Details

Training and Other Policy Documents

Publications